PAY WITH KLARNA NOW AVAILABLE
RATED ★★★★★ ON TRUSTPILOT
FIRST 4 SAMPLES FREE
0
TRADE

Your Basket 0

Your basket is currently empty

start shopping
Firenze Python Decor Tile - 1200mm x 600mm
Special Order
Firenze Python Decor Tile - 1200mm x 600mm
Special Order

Firenze Python Decor Tile - 1200mm x 600mm

Size: 1200mm x 600mm
Product code: TEF51P6
Order Tiles
Order Samples
Select Size:

£282.25

Select Quantity
£392.01 per m2
£ 282.25 per tile
Not sure how many you need? Try our calculator
Special Order

Estimated delivery: 2-4 weeks

Product Overview

specifications

installation Tips

Delivery & Returns

How to

Do It Yourself

The thought is basically: put down adhesive, place tile, grout tile, seal grout. That’s it, no fuss no muss!

Step 1
Step 2
Step 3
Step 4

Prepare Your Surface

  • Clean the Surface Ensure the Surface is clean, smooth, and free from dust or grease.
  • Fix Imperfections: Fill any cracks or holes with a wall filler and let it dry completely.
  • Prime the Surface: For porous surfaces, apply a primer to ensure the adhesive sticks well.

Equipment Needed

  • Tile (enough to cover the square footage of room plus 10% for waste)
  • Thin-Set Mortar
  • Thin-Set or Grout Mixing Drill

Plan Your Layout

  • Measure and Mark: Measure the wall and mark a horizontal line at the base using a level. This will serve as your guide.
  • Dry Lay Tiles: Lay tiles on a flat surface to decide on the pattern and check if cuts are needed.
  • Plan for Cuts: Ensure that cut tiles are placed in less noticeable areas, like corners and the ends of walls and floors.

 

Apply Adhesive and Fix Tiles

  • Mix and Apply Adhesive: Use a notched trowel to spread tile adhesive on a small section of the wall.
  • Place Tiles: Start from the bottom centre and press tiles firmly into the adhesive.
  • Use Spacers: Place tile spacers between each tile to maintain even gaps for grouting.

 

Cut Tiles and Add Grout

  • Cut to Fit: Use a tile cutter to trim tiles for edges, corners, or around obstacles like outlets.
  • Apply Grout: Once the adhesive has dried (usually 24 hours), remove spacers and apply grout with a grout float.
  • Clean Excess Grout: Wipe the tiles with a damp sponge before the grout hardens.
  • Place your trim if you are using one.